Composite decking is a material created by blending plastic and wood fibers to provide superior building material. Despite its advantages, it is not indestructible. Decking foundations are an important consideration. One of the most popular inquiries among those who have no prior experience with decking is whether composite decking may be laid directly on the ground. But first, why is this a problem?
Why shouldn’t decking be installed directly on the ground?
Many people advise against putting decking on grass because of the possibility of harm. Rotting and insect damage are two common problems you may experience. Mold and mildew can form as a result of moisture seeping through the surface. The degradation will begin on the decking structure and progress to the decking planks over time.
Naturally, kompositmaterial outperforms wood. They can take more punishment than wood decking. Unfortunately, if they are put incorrectly, they will not survive long. It may or may not be advisable to lay composite decking directly on the ground, depending on the present conditions. With that said, there are several ways to install composite decking without causing any problems.
How to lay Composite Decking on the ground
There are several issues that might arise when putting komposittrall on bare ground. However, there are a few basic things you may take to avoid such problems. The processes for installing composite decking at ground level are as follows.
- Plan the arrangement of your sundeck first. By hammering stakes and using stakes and paint, you may mark the positions on the dirt.
- If required, use a weed killer. You’ll need to dig at least 5 cm deep if you want to deal with bare dirt.
- The next step is to make sure the space is level. Place a flat surface, such as a board, on top of it and use a spirit level to confirm. If the earth isn’t level, tamp it down.
- To discourage weed growth, which can be detrimental to the decking, cover the area with landscaping fabric. Then The gravel will aid in the drainage of any water that leaks through the decking. To flatten the earth, you may need to tamp it down again.
- You have the option of installing the decking planks flat on the gravel or elevating them for further moisture and damage protection. You can utilize a sleeper system, which consists of beams and joists, to elevate the decking.
- For the greatest results, use water-resistant materials like pressure-treated wood or composite timber.
Finally, follow the directions to install the decking planks. Install edging around the decking for further protection, especially if you opt to build it directly on the ground.
How to put Composite Decking tiles together
Decking tiles are another option for laying composite decking on the soil. Installing composite decking boards might be more difficult, especially for novices. Here’s how to go about doing it.
- Then, depending on the height of your decking, excavate a few inches of earth. To level and compact the dirt, use a tamper.
- Next, tamper with the area to ensure that it is flat. If the ground is not level, you may need to excavate or add extra dirt. Then, using landscaping fabric and gravel, cover the area. If required, tamper with it and repack it.
Finally, follow the directions for installing the decking tiles.
Read More: What kinds of Composite Decking are there?